RockyMounts MonoRail - 2 Bike Rack - Fits 1.25" Hitches

The RockyMounts MonoRail 1.25" is a two bike platform rack that carries nearly any bicycle. Bikes get held in place with a ratcheting arm against their front wheel and a strap through the rear wheel. Nearly any bicycle is compatible, including wheel sizes from 20" to 29" and fat tires in widths up to 5" with 197mm rear axle spacing (Rockshox Bluto forks).

Carries 1 or 2 bikes on 1.25" receivers

The 1.25 inch version of the RockyMounts Monorail carries a maximum of two bikes. Bikes sit in alternate directions so handlebars don't interfere with each other.

Carries nearly any bicycle with no frame contact

The MonoRail is a modern rack built with modern bike geometry in mind. Wheel sizes from 20" to 29" fit into the rack, whether you are hauling road bikes, mountain bikes, kids bikes, or fat bikes. Fat tire widths up to 5" with 197mm rear axle spacing will work - including the enormous Rockshox Bluto forks. Bikes sit 13" apart, and there is a 3" adjustment side to side to fine tune positioning. Keep in mind that the front wheel ratcheting arm must clamp against the rubber of the front wheel, so front fenders, racks, and panniers will need to be removed first.

Folding with rear handle

Unlike competing racks, the MonoRail has its folding handle located at the end of the rack for ease of use. No need to reach through the bike frames to fold the rack down. The rack is able to fold down away from the vehicle's rear hatch with two bikes loaded. When you're all done, the rack folds up vertically against the rear of the vehicle for storage.

Fully locking out of the box

RockyMounts includes a braided steel cable lock with the MonoRail. This cable loops through your bike frames, and then hooks on to the end of the included locking, bolted hitch pin before you lock the cap on the end of the bolt.

Features

• Handle located at end of rack for ease of use, stowed and folded away positions
  
• No bike frame contact, hook clamps front wheel
  
• CRMO hitch tube is light weight and corrosion resistant
  
• Anti-wobble threaded locking hitch bolt keeps the rack solid and secure
  
• Includes a cable lock to loop through bikes and back to locking hitch pin

Specifications

• Weight Capacity(Total): 120 lbs.
  
• Weight Capacity(Per bike): 60 lbs.
  
• Maximum wheel base: 50"
  
• Minimum wheel base: 36"
  
• Fits 20" to 29" wheels
  
• Maximum tire width: 5"
  
• Distance between bikes (Centre to centre): 12.5"
  
• Fits 1.25" hitch receivers only
  
• Important Measurements:
  
  • Hitch pin to closest point when folded up: 4.25"
    
  • Hitch pin to furthest point when folded up: 16.25"
    
  • Hitch pin to closest bike tray is use: 11.75"
    
  • Hitch pin to furthest point when in use: 28.75"
• Product Weight: 39 lbs.
  
• Packaged Weight: 51 lbs.
  
• Construction: The rack is comprised of a mix of materials including a CRMO base, high strength steel upper construction, 6063 aluminum load arms and UV stable nylons
  
• Limited lifetime warranty from RockyMounts
  
• Product instructions: PDF download
  
• Manufacturer: RockyMounts